Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2016.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Bus stops along SORTA bus routes in the city of Cincinnati, Norwood, Saint Bernard, Columbia Township, and partially Hamilton County. Stop buses names, and line names are available in the attribute table. Inbound and Outbound information is also available.

The Street Centerlines layer is a series of lines (or polylines) digitized along the center of streets. These lines connected at intersections creating a street network. Each line carries attributes for the street name, address range, road class, jurisdiction and other data items.

Street centerlines are one of the most fundamental and useful G.I.S. layers. There are many applications that require accurate and comprehensive street centerlines datasets.
Main applications:
Networking (routing, navigating etc.)
Geocoding - assigning a geographic location to an address based on the address ranges stored in the street data.

Data Description: This dataset captures all Cincinnati Police Department stops of pedestrians. This data includes time of incident, officer assignment, race/sex of stop subject, and outcome of the stop ("Action taken").. Individual pedestrian stops may populate multiple data rows to account for multiple outcomes: "interview number" is the unique identifier for every one (1) pedestrian stop.

Data Creation: This data is created when CPD completes a pedestrian stop and logs the interview via Contact Cards. Contact Cards are a result of the Collaborative Agreement. Contact Cards are manually entered and may experience lags in data entry.

Data Created by: This data is created by the Cincinnati Police Department.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/gw5q-kjng

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

This layer displays Urban Overlay Districts in the city of Cincinnati. This layer helps to protect and enhance the physical character of selected business districts that have adopted Urban Design Plans, and ensures that infill development does not adversely affect the physical character of the area. Fifteen Urban Design Overlay Districts are displayed in this layer.

The Zoning Designation layer displays Zoning in the city of Cincinnati, Anderson Township, Blue Ash, Cheviot, Colerain Township, Columbia Township, Crosby Township, Forest Park, Green Township, Harrison Township, Lockland, Miami Township, Montgomery, North Bend, Norwood, Springfield Township, Sycamore township, Symmes Township. The Rural Zoning Commission (RZC) serves the Board of County Commissioners by administering and enforcing zoning in four townships, or parts thereof, and by providing contract services to a number of townships and villages in Hamilton County.
The layer isn't displayed when zoomed out beyond 1:115,000.

Data Description: A list of all of the haulers that are bonded and permitted with MSD and are allowed to discharge at the MSD Septage Receiving Station and the categories which they are approved to haul.

Data Creation: This data is maintained by MSD.

Data Created By: Metropolitan Sewer District (MSD)

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this data set.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: This data set contains procurement data related to the city’s fleet of vehicles

Data Creation: Data is generated for procurement requests and purchases

Data Created By: Fleet Services Division of the Department of Public Services

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: This data set provides all usage information for all web pages on the City of Cincinnati's interactive dashboard portal, CincyInsights.

Data Creation: This data set is maintained by the City of Cincinnati's Open Data host, Socrata.

Data Created By: Socrata

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this data set.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2017.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html or https://www.nfirs.fema.gov/

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.