Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2020.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2021.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Award data for bids from 2013-2015

Building Footprints are polygon features representing photogrammetrically captured building outlines. The building footprints are rough approximations of buildings. They they do not show the exact footprint.
The current version of building footprints are based on aerial photography taken in Spring of 2011. Updates are made for significant structures as needed from digitized development plan approvals and notifications of demolitions until the next aerial flyover. The Building Footprints layer contains building structures including mobile homes, garages, water storage tanks and known underground building features.
New building footprints based on aerial imagery taken in Spring of 2017 will be available in April, 2018.

Data Description: This data set includes licenses pertaining to: Amusement Games, Antique Dealer, Appliance Dealer, Ball Grounds, Billiards and Pool, Cabaret, Carousels, Chauffeur, Circus, Dance Hall, Junk, Second Hand, Scrap, Massage Services, Motor Vehicle Salvage, Skating Rink, Theater, etc. For more information, https://www.cincinnati-oh.gov/finance/licenses-lost-check-affidavit/business-license-applications/

Data Creation: Business Licenses are processed by Treasury division in the Department of Finance.

Data Created By: The Treasury Division

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this data set.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

This data set contains all business opportunities posted from 09/15/2015 - 12/31/2020.

Business Opportunities has moved to https://www.cincinnati-oh.gov/noncms/cmgr/business-opportunities/. Please update any browser bookmarks and contact our office at (513) 352-3209 if you have questions.

Offerors may register as a City vendor online at https://vss.cincinnati-oh.gov/vssprod/Advantage4.

The City publishes information on the City of Cincinnati Internet web site at www.cincinnati-oh.gov, which includes the Cincinnati Municipal Code (CMC) and the information concerning the rules and regulations governing the City’s Small Business Enterprise (SBE) Program and Minority/Women Business Enterprise (M/WBE) Program.

Business Opportunities has moved to https://www.cincinnati-oh.gov/noncms/cmgr/business-opportunities/. Please update any browser bookmarks and contact our office at (513) 352-3209 if you have questions.

Data Description: This dataset captures All Cincinnati 311 (Non-Emergency) Service Requests from 2012 to present including how long customer service requests have been open, by location, service request type, and department work group. Citizen Service Requests (CSR) give Cincinnati residents the opportunity to submit service request for concerns like potholes, tall grass and missed trash pick-up.

Data Creation: Using the Fix It Cincy! Mobile App, the customer service request online portal and the hotline (513-591-6000), citizen service requests are routed directly to City departments, including Transportation & Engineering, Buildings & Inspections, Health and Public Services. Once the department's work on the service request ticket is completed and the request is marked as "closed," customers receive an email notification that the work has been completed, followed by a link to an optional customer service feedback survey.

Data Created By: The source of this data is the CAGIS.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/ve9a-xare

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: Cincinnati Building Permits that have been applied for since January 1, 2010.

Data Creation: Data is entered by the Buildings & Inspections department.

Data Created By: City of Cincinnati

Refresh Frequency: Daily

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/vi3f-a2sx

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: This data set contains Cincinnati Building Combo Permits applied or issued since January 1, 2014. A combo permit is a composition type that indicates multiple permits (example: alteration and HVAC) were applied for at the same time under one APD number. This data set includes building combo permits with description of work, plan review comments and other characteristics.

This data set is a machine-readable version of data populating the Department of Buildings & Inspections (B&I) public PDF reports. To view historic reports: http://cincinnati-oh.gov/buildings/reports-data/

Data Creation: This data is created when a permit application is entered into the Permits Plus system.

Data Created By: Buildings & Inspections (B&I)

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad