Data Description: Traffic Crash Reports are records in the event of a CPD response to a traffic crash.

Data Creation: This dataset includes fatal, injury, and non-injury crashes.

Data Created By: The source of this data is the City of Cincinnati Police Department.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/sj28-dfcf

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: This data represents reported Crime Incidents in the City of Cincinnati. Incidents are the records, of reported crimes, collated by an agency for management. Incidents are typically housed in a Records Management System (RMS) that stores agency-wide data about law enforcement operations. This does not include police calls for service, arrest information, final case determination, or any other incident outcome data.

Data Creation: The Cincinnati Police Department's (CPD) records crime incidents in the City through Records Management System (RMS) that stores agency-wide data about law enforcement operations.

Data Created By: The source of this data is the Cincinnati Police Department.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/8eaa-xrvz

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: This dataset captures all Cincinnati Police Department Calls for Service. The City of Cincinnati's Computer Aided Dispatch (CAD) system records police incident response activity, which includes all calls for service to emergency operators, 911, alarms, police radio and non-emergency calls. CAD records all dispatch information, which is used by dispatchers, field supervisors, and on-scene officers to determine the priority, severity, and response needs surrounding the incident. Once an officer responds to a call, he/she updates the disposition to reflect findings on-scene.
This dataset includes both proactive and reactive police incident data.

Data Creation: This data is created through the City’s computer-aided dispatch (CAD) system.

Data Created By: The source of this data is the Cincinnati Police Department.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/xw7t-5phj

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: Fire Incident data includes all fire incident responses. This includes emergency medical services (EMS) calls, fires, rescue incidents, and all other services handled by the Fire Department.
All runs are coded according to classification: for EMS, this includes ALS (advanced life support); BLS (basic life support); etc.

Data Creation: This data is created when a run is entered into the City of Cincinnati’s computer-aided dispatch (CAD) database.

Data Created By: The source of this data is the City of Cincinnati's computer aided dispatch (CAD) database.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/6jrc-cmn5

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: This dataset captures confirmed shooting events in the City of Cincinnati. Shootings events are captured in the Computer Aided Dispatch System (CAD), and are ultimately stored in the City's Records Management System (RMS).

No personal or identifying (or otherwise sensitive) victim or suspect information is included in this data set.

Data Creation: This data is created through the City’s computer-aided dispatch (CAD) system.

Data Created By: The source of this data is the Cincinnati Police Department.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/xw7t-5phj

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

*This information will not be updated while the Cincinnati Police Department undergoes transfer to a new data management system.*

Data Description: This data represents use of force incidents by the Cincinnati Police Department. Use of force can generally be defined as the means of compelling compliance or overcoming resistance to an officer’s command(s) in order to protect life or property or to take a person into custody.

Data Creation: This data is created through reporting by the Cincinnati Police Department.

Data Created By: The source of this data is the Cincinnati Police Department.

Refresh Frequency: This information will not be updated while the Cincinnati Police Department undergoes transfer to a new data management system.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/quk6-rcaw

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: CPD & CFD Calls For Service includes all Fire and Police calls for service from the current day. Calls For Service are the events captured in an agency’s Computer-Aided Dispatch (CAD) system used to facilitate incident response.
This dataset includes both proactive and reactive police incident data.

Data Creation: This data is created when a run is entered into the City of Cincinnati’s computer-aided dispatch (CAD) database.

Data Created By: The source of this data is the City of Cincinnati's computer-aided dispatch (CAD) database.

Refresh Frequency: This data is updated every 15 minutes.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/a4d9-vw5s and https://insights.cincinnati-oh.gov/stories/s/6jrc-cmn5

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: CPD & CFD Calls For Service includes all Fire and Police calls for service from the current day. Calls For Service are the events captured in an agency’s Computer-Aided Dispatch (CAD) system used to facilitate incident response.

Data Creation: This dataset is created when a Call for Service is received for a suspected drug oversode.

Data Created By: The source of this data is the City of Cincinnati Police Department.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/dm3s-ep3u

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: This dataset captures all subjects of traffic stops involving motor vehicles. Time of incident, officer assignment, race/sex of stop subject, and outcome of the stop ("Action taken") are also included in this data. Individual traffic stops may populate multiple data rows to account for multiple subjects and multiple outcomes: "interview number" is the unique identifier for every one (1) traffic stop.

Data Creation: Cincinnati Police Department (CPD) officers record all traffic stops involving motor vehicles via Contact Cards. Contact Cards are completed every time a CPD officer stops vehicles or pedestrians. The use of Contact Cards came out of the Collaborative Agreement.

Data Created By: The source of this data is the Cincinnati Police Department.

Refresh Frequency: This data is updated daily.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/h48j-wkz6

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2010.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.