Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2015.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

The Cincinnati SNA (Statistical Neighborhood Approximations) Boundary layer shows Cincinnati neighborhoods modified to closely "fit" the US Census 2010 Data & 2006-2010 American Community Survey five-year estimates. These boundaries are useful in that they can be correlated to US Census population data. The boundaries are redrawn every ten years following the Census.

Note: The Cincinnati SNA Boundaries are not the same as the Cincinnati Community Council Neighborhood Boundaries.

Data Description: "Small Cells" are low-powered cellular radio access nodes deployed to provide in-building and outdoor wireless service (for internet, cell service, etc.). They are used by mobile operators to extend service coverage and/or increase network capacity, and are subject to regulation by the Federal Communications Commission (FCC). Small cells are typically radio equipment and antennae, and are placed on structures in high-density areas.

While small cells can be installed in both private and public spaces, this data set only includes permits for small cell installation in the public right-of-way. These permits are regulated by the City's department of Transportation & Engineering (DOTE). In this case, "right-of-way" means that a "wireless support structure" in the right of way. This could include city-owned poles/structures; third party-owned poles/structures; or any other structure that can be modified to support small cell installation, such as a bus shelter or certain types of street sights. In this case, right-of-way refers to the location of the antenna and supporting equipment.

The purpose of small cell permits in the right of way is for the provision of wireless service to the public. The City of Cincinnati has structured the small cell permitting process to supporting early and efficient roll-out of emerging wireless technologies, while simultaneously preserving local design guidelines and respecting the character of Cincinnati neighborhoods.

Data Creation: This data set is collected and maintained by the Department of Transportation & Engineering (DOTE)

Data Created By: Department of Transportation & Engineering (DOTE)

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: This dataset contains the record of all Citizen Service Request (CSR) calls received at the call center at the Department of Public Services (DPS). For full CSR data visit: https://data.cincinnati-oh.gov/Innovative-Government/Customer-Service-Requests-CSRs-/gcej-gmiw
Citizen Service Requests (CSR) gives Cincinnati residents the opportunity to submit service request for concerns like furniture pick-up, tall grass and pothole repairs. Using the Fix It Cincy! Mobile App, the customer service request online portal and the hotline (513-591-6000), citizen service requests are routed directly to City departments to be completed

Data Creation: Data is generated by incoming calls received at the DPS call center

Data Created By: DPS

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

The Civil and Municipal Boundaries layer displays the 52 jurisdictional boundaries of cities, villages and townships of Hamilton County. As of the 2010 census, there were 806,631 people, 346,790 households, and 212,582 families residing in the county. The population density was 2,075 people per square mile (801/km²). There were 373,393 housing units at an average density of 917 per square mile (354/km²).

Data Description: This dataset contains information on the Cincinnati Health Department's (CHD) Creating Healthy Communities Coalition (CHCC). Creating Health Communities is an Ohio Department of Health (ODH) program. This dataset has the location and estimated number of people impacted by CHCC activities implemented in 2015-2017. For more information, visit https://www.cincinnati-oh.gov/health/cincinnati-health-department-divisions1/environmental-health/health-promotion-worksite-wellness/

Disclaimers:
The CHCC dashboard includes data from outside the city limits, including Northern Kentucky, Hamilton County, Columbus area, and Dayton area, for the following measures: UDF Healthy Food Retail, Produce Perks, and Tobacco Free Policies.

A residential population may be impacted by multiple PSE changes, due to the location of various PSE changes. For example, in 2015 the Stanley Rowe Senior Citizens population was impacted by a Crime Prevention Through Environmental Design PSE change. The same population was impacted again in 2016 with a Smoke-free Policy change.

Data Creation: The Cincinnati Health Department provides updates on each CHCC activity impacting Cincinnati residents

Data Created By: Cincinnati Health Department

Refresh Frequency: Daily

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/5ygy-4y6j

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2014.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

The City publishes information on the City of Cincinnati Internet web site at www.cincinnati-oh.gov, which includes the Cincinnati Municipal Code (CMC) and the information concerning the rules and regulations governing the City’s Small Business Enterprise (SBE) Program and Minority/Women Business Enterprise (M/WBE) Program. Offerors may register as a City vendor online at https://vss.cincinnati-oh.gov.

Data Description: This data set contains all license & use permits issued by City of Cincinnati departments (including Buildings & Inspections; Cincinnati Fire Department; Cincinnati Health Department; Transportation & Engineering; and Finance Department). Licenses range from food service operation, to open flame permits, to swimming pool licenses. This data set also contains licenses & use permits issued by other Hamilton County jurisdictions.

Data Creation: All data is input by the respective licensing agencies, and stored by Cincinnati Area Geographic Information Systems (CAGIS). This data is also available on the CAGIS Property Activity Report website: http://cagismaps.hamilton-co.org/PropertyActivity/cagisreport

Data Created By: CAGIS

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this data set.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: This data set includes department names, current directors, department code, and the web URL to the departments main website and contact information. Department codes are derived from CFS and can be used to join this information with other department level data.

Data Creation: This data set is maintained and collected by OPDA

Data Created By: OPDA

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad