Data Description: Emergency Communications Center Calls are records captured for each call. The call data does not contain the nature of the emergency or dispatched resources. For dispatch data reference Police Calls for Service (CAD) or Cincinnati Fire Incidents (CAD).

Data Creation: This dataset includes both emergency (911) and administrative calls to the center. To obtain just emergency (911) calls filter for Call Type ID = 911 CALLS.

Data Created By: The source of this data is the City of Cincinnati's Call System provided by West Communications.

Refresh Frequency: This dataset updates weekly on Fridays.

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/snnn-n6ic

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2011.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Award data for bids from 2013-2015

Data Description: This dataset includes information on the location, hours, care type, services, provided, and insurance accepted for Cincinnati Health Department Health Centers.

Data Creation: Data is provided by the Health Department

Data Created By: Health Department

Refresh Frequency: As needed

CincyInsights: The City of Cincinnati maintains an interactive dashboard portal, CincyInsights in addition to our Open Data in an effort to increase access and usage of city data. This data set has an associated dashboard available here: https://insights.cincinnati-oh.gov/stories/s/tgfw-4wez/

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Police Districts layer displays the 5 police districts of the city of Cincinnati. District 1 is responsible for patrolling and policing five neighborhoods: the Mt. Adams, Over-the-Rhine, Pendleton, Queensgate and the West End. Geographically, District 2 officers patrol the largest area within the City of Cincinnati. Evanston, East Walnut Hills, O'Bryonville, Hyde Park, Mt. Lookout, Oakley, Madisonville, Kennedy Heights, Pleasant Ridge, East End, Columbia-Tusculum, Linwood, Mt. Washington and California are the neighborhoods that comprise District 2. District 3 serves the Western side of the City of Cincinnati, covering about 20 square miles. District 3 has about 95,000 residents in 14 separate neighborhoods: East Price Hill, West Price Hill, Lower Price Hill, East Westwood, English Woods, Millvale & Moosewood, North Fairmount, South Fairmount, Riverside, Sayler Park, Sedamsville, South Cumminsville, Roll Hill and Westwood. District 4 is responsible for patrolling and policing 10 neighborhoods: Mount Auburn, Corryville, Walnut Hills, Avondale, North Avondale, Paddock Hills, Bond Hill, Roselawn, Carthage, and Hartwell. District 5 police serve the communities of Clifton Heights-University Heights-Fairview, Camp Washington, Clifton, Northside, Winton Hills, Winton Place, College Hill, and Mt. Airy. This also includes a large portion of the University of Cincinnati, whose main campus is situated within the boundaries of District 5.

Data Description: This dataset contains all information on work orders completed for assets from January 2008 to present. This includes but it not limited to type of work completed, date stamps of all repair and maintenance milestones, all costs associated with the work order, amount of labor completed and where the work orders were completed.

Data Creation: Data is recorded for all maintenance and repairs of the City’s vehicle fleet

Data Created By: Fleet Services Division of the Public Services Department

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Data Description: The National Fire Incident Reporting System (NFIRS) is a reporting standard that fire departments nationwide use to uniformly report on the full range of fire department activities. This dataset encompasses all fire incidents reported to NFIRS that were responded to by the Cincinnati Fire Department in the year 2015.

Data Creation: NFIRS was created in 1976 to address the United State’s fire problem and is jointly managed by the U.S Fire Administration (USFA) and the National Fire Information Council (NFIC). Over the life of the system, all 50 states, more than 40 major metropolitan areas, and more than 15,000 fire departments have participated in NFIRS. Fore more information please visit: https://www.usfa.fema.gov/data/nfirs/about/index.html

Data Created By: The source of this data is the Cincinnati Fire Department.

Refresh Frequency: This dataset is static and posted annually.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: This data set is all closed Citizen Complaint Authority (CCA) complaints that have been received in the past five years. This data set contains complaints that are processed, investigated and closed by CCA. It includes data such as the type of event reported, date and time of incident, officer and citizen demographics, and allegation investigated.

Data Creation: This data is created when a citizen files a complaint against a Cincinnati Police officer.

Data Created By: The source of this data is the Citizen Complaint Authority (CCA).

Refresh Frequency: This data is updated daily.

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

Disclaimer: The attribute unique case identifier is the ID for one incident. One incident can contain multiple allegations and involve multiple officers and citizens. 2. Geo location information is not provided for incidents that are not CAGIS verified addresses or if the incident occurs at the residence of a complainant. This is done to protect the individual's privacy
In compliance with privacy laws, all Public Safety datasets are anonymized and appropriately redacted prior to publication on the City of Cincinnati’s Open Data Portal. This means that for all public safety datasets: (1) the last two digits of all addresses have been replaced with “XX,” and in cases where there is a single digit street address, the entire address number is replaced with "X"; and (2) Latitude and Longitude have been randomly skewed to represent values within the same block area (but not the exact location) of the incident.

Data Description: "Small Cells" are low-powered cellular radio access nodes deployed to provide in-building and outdoor wireless service (for internet, cell service, etc.). They are used by mobile operators to extend service coverage and/or increase network capacity, and are subject to regulation by the Federal Communications Commission (FCC). Small cells are typically radio equipment and antennae, and are placed on structures in high-density areas.

While small cells can be installed in both private and public spaces, this data set only includes permits for small cell installation in the public right-of-way. These permits are regulated by the City's department of Transportation & Engineering (DOTE). In this case, "right-of-way" means that a "wireless support structure" in the right of way. This could include city-owned poles/structures; third party-owned poles/structures; or any other structure that can be modified to support small cell installation, such as a bus shelter or certain types of street sights. In this case, right-of-way refers to the location of the antenna and supporting equipment.

The purpose of small cell permits in the right of way is for the provision of wireless service to the public. The City of Cincinnati has structured the small cell permitting process to supporting early and efficient roll-out of emerging wireless technologies, while simultaneously preserving local design guidelines and respecting the character of Cincinnati neighborhoods.

Data Creation: This data set is collected and maintained by the Department of Transportation & Engineering (DOTE)

Data Created By: Department of Transportation & Engineering (DOTE)

Refresh Frequency: Daily

Data Dictionary: A data dictionary providing definitions of columns and attributes is available as an attachment to this dataset.

Processing: The City of Cincinnati is committed to providing the most granular and accurate data possible. In that pursuit the Office of Performance and Data Analytics facilitates standard processing to most raw data prior to publication. Processing includes but is not limited: address verification, geocoding, decoding attributes, and addition of administrative areas (i.e. Census, neighborhoods, police districts, etc.).

Data Usage: For directions on downloading and using open data please visit our How-to Guide: https://data.cincinnati-oh.gov/dataset/Open-Data-How-To-Guide/gdr9-g3ad

The Cincinnati SNA (Statistical Neighborhood Approximations) Boundary layer shows Cincinnati neighborhoods modified to closely "fit" the US Census 2010 Data & 2006-2010 American Community Survey five-year estimates. These boundaries are useful in that they can be correlated to US Census population data. The boundaries are redrawn every ten years following the Census.

Note: The Cincinnati SNA Boundaries are not the same as the Cincinnati Community Council Neighborhood Boundaries.